ISS Coaching Lucknow

Education: A candidate for the Indian Statistical Service must have obtained a Bachelor's Degree with Statistics/Mathematical Statistics/Applied Statistics as one of the subject or a Master's degree in Statistics/Mathematical Statistics/Applied Statistics from a University incorporated by an Act of the Central or State Legislature in India or other Educational Institutes established by an Act of Parliament or declared to be deemed as University under Section 3 of the University Grants Commission Act, 1956 or a Foreign University approved by the Central Government from time to time.

Age:

(a) A candidate must have attained the age of 21 years and must not have attained the age of 30 years on 1st August, 2023 i.e he/she must have been born not earlier than 2nd August, 1993 and not later than 1st August, 2002. (b) The upper age-limit prescribed above will be relaxable as follows :— (i) up to a maximum of five years if a candidate belong to a Scheduled Caste or a Scheduled Tribe; (ii) up to a maximum of three years in the case of candidate belonging to Other Backward Classes who are eligible to avail of reservation applicable to such candidates; (iii) up to a maximum of three years in the case of Defence Services Personnel disabled in operations during hostilities with any foreign country or in a disturbed area, andreleased as a consequence thereof ; (iv) up to a maximum of five vears in the case of ex-servicemen.

Exam Pattern:

The examination shall be conducted according to the following plan—

Part I-Written examination carrying a maximum of 1000 marks in the subjects as shown below.

Part II-Viva voce of such candidates as may be called by the Commission carrying a maximum of 200 marks.

A:-Indian Economic Services

B:-Indian Statistical Services

Note-1: Statistics I & II will be of Objective Type Questions (80 questions with maximum marks of 200 in each paper) to be attempted in 120 minutes.

Note-2: Statistics III and IV will be of Descriptive Type having Short Answer/ Small Problems Questions (50%) and Long Answer and Comprehension problem questions (50%). At least one Short Answer and One Long Answer Question from each section is compulsory. In Statistics-IV, there will be SEVEN Sections in the paper. Candidates have to choose any TWO Sections out of them. All Sections will carry equal marks.

Note-3: The papers on General English and General Studies, common to both Indian Economic Service and Indian Statistical Service will be of subjective type.

Syllabus

STATISTICS-I (OBJECTIVE TYPE) (For ISS only)

I-Probability:Classical and axiomatic definitions of Probability and consequences. Law of tot: probability, Conditional probability, Bayes' theorem and applications. Discrete an continuous random variables. Distribution functions and their properties. Standard discrete and continuous probability distributions - Bernoulli, Uniform, Binomia Poisson, Geometric, Rectangular, Exponential, Normal, Cauchy, Hyper geometri Multinomial, Laplace, Negative binomial, Beta, Gamma, Lognormal. Random vectors, Joir and marginal distributions, conditional distributions, Distributions of functions of rando: variables. Modes of convergences of sequences of random variables - in distribution, i probability, with probability one and in mean square. Mathematical expectation an conditional expectation. Characteristic function, moment and probability generatin functions, Inversion, uniqueness and continuity theorems. Borel 0-1 law, Kolmogorov's 0- law. Tchebycheff's and Kolmogorov's inequalities. Laws of large numbers and central lim theorems for independent variables.

II-Statistical Method:Collection, compilation and presentation of data, charts, diagrams and histogran Frequency distribution. Measures of location, dispersion, skewness and kurtosis. Bivariaf and multivariate data. Association and contingency. Curve fitting and orthogon: polynomials. Bivariate normal distribution. Regression-linear, polynomial. Distribution the correlation coefficient, Partial and multiple correlation, Intraclass correlatior Correlation ratio. Standard errors and large sample test. Sampling distributions of sample mean, samp variance, t, chi-square and F; tests of significance based on them, Small sample tests. Non-parametric tests-Goodness of fit, sign, median, run, Wilcoxon, Mann-Whitney, Walc Wolfowitz and Kolmogorov-Smirnov. Order statistics-minimum, maximum, range an median. Concept of Asymptotic relative efficiency.

III-Numerical Analysis Finite differences of different orders: - A, E and D operators, factorial representation of polynomial, separation of symbols, sub-division of intervals, differences of zero.

Concept of interpolation and extrapolation: Newton Gregory's forward and backwar interpolation formulae for equal intervals, divided differences and their properties, Newton formula for divided difference, Lagrange’s formula for unequal intervals, central differenc formula due to Gauss, Sterling and Bessel, concept of error terms in interpolation formula. Inverse interpolation: Different methods of inverse interpolation.

III-a Numerical differentiation:Trapezoidal, Simpson's one-third and three-eight rule an Waddles rule.

Summation of Series:Whose general term (i) is the first difference of a function (ii) is i geometric progression.

Numerical solutions of differential equations:Euler's Method, Milne’s Method, Picard Method and Runge-Kutta Method.

IV:- Computer application and Data Processing:Basics of Computer: Operations of a computer, Different units of a computer system lik central processing unit, memory unit, arithmetic and logical unit, input unit, output un etc., Hardware including different types of input, output and peripheral devices, Softwar system and application software, number systems, Operating systems, packages an utilities, Low and High level languages, Compiler, Assembler, Memory — RAM, ROM, unit ¢ computer memory (bits, bytes etc.), Network — LAN, WAN, internet, intranet, basics computer security, virus, antivirus, firewall, spyware, malware etc. Basics of Programming: Algorithm, Flowchart, Data, Information, Database, overview different programming languages, frontend and backend of a project, variables, contr structures, arrays and their usages, functions, modules, loops, conditional statement: exceptions, debugging and related concepts.

STATISTICS-II (OBJECTIVE TYPE) (For ISS only)

(i) Linear Models:Theory of linear estimation, Gauss-Markov linear models, estimable functions, error and estimation space, normal equations and least square estimators, estimation of error variance, estimation with correlated observations, properties of least square estimators, generalized inverse of a matrix and solution of normal equations, variances and covariances of least square estimators. One way and two-way classifications, fixed, random and mixed effects models. Analysis of variance (two-way classification only), multiple comparison tests due to Tukey, Scheffe and Student-Newmann-Keul-Duncan.

(ii) Statistical Inference and Hypothesis Testing:(ii) Statistical Inference and Hypothesis Testing: Characteristics of good estimator. Estimation methods of maximum likelihood, minimum chi-square, moments and least squares. Optimal properties of maximum likelihood estimators. Minimum variance unbiased estimators. Minimum variance bound estimators. Cramer-Rao inequality. Bhattacharya bounds. Sufficient estimator. factorization theorem. Complete statistics. Rao-Blackwell theorem. Confidence interval estimation. Optimum confidence bounds. Resampling, Bootstrap and Jacknife. Hypothesis testing: Simple and composite hypotheses. Two kinds of error. Critical region. Different types of critical regions and similar regions. Power function. Most powerful and uniformly most powerful tests. Neyman-Pearson fundamental lemma. Unbiased test. Randomized test. Likelihood ratio test. Wald's SPRT, OC and ASN functions. Elements of decision theory.

(iii) Official Statistics: National and International official statistical system Official Statistics: (a) Need, Uses, Users, Reliability, Relevance, Limitations, Transparency, its visibility (b) Compilation, Collection, Processing, Analysis and Dissemination, Agencies Involved, Methods National Statistical Organization: Vision and Mission, NSSO and CSO; roles and responsibilities; Important activities, Publications etc. National Statistical Commission: Need, Constitution, its role, functions etc; Legal Acts/ Provisions / Support for Official Statistics; Important Acts Index Numbers: Different Types, Need, Data Collection Mechanism, Periodicity, Agencies Involved, Uses Sector Wise Statistics: Agriculture, Health, Education, Women and Child etc. Important Surveys & Census, Indicators, Agencies and Usages etc. National Accounts: Definition, Basic Concepts; issues; the Strategy, Collection of Data and Release. Population Census: Need, Data Collected, Periodicity, Methods of data collection, dissemination, Agencies involved.

Misc: Socio Economic Indicators, Gender Awareness/Statistics, Important Surveys and Censuses.

STATISTICS-III (DESCRIPTIVE TYPE) (For ISS only)

(i) Sampling Techniques: Concept of population and sample, need for sampling, complete enumeration versus sampling, basic concepts in sampling, sampling and Non-sampling error, Methodologies in sample surveys (questionnaires, sampling design and methods followed in field investigation) by NSSO. Subjective or purposive sampling, probability sampling or random sampling, simple random sampling with and without replacement, estimation of population mean, population proportions and their standard errors. Stratified random sampling, proportional and optimum allocation, comparison with simple random sampling for fixed sample size. Covariance and Variance Function. Ratio, product and regression methods of estimation, estimation of population mean, evaluation of Bias and Variance to the first order of approximation, comparison with simple random sampling. Systematic sampling (when population size (N) is an integer multiple of sampling size (n)). Estimation of population mean and standard error of this estimate, comparison with simple random sampling. Sampling with probability proportional to size (with and without replacement method), Des Raj and Das estimators for n=2, Horvitz-Thomson'’s estimator Equal size cluster sampling: estimators of population mean and total and their standard errors, comparison of cluster sampling with SRS in terms of intra-class correlation coefficient. Concept of multistage sampling and its application, two-stage sampling with equal number of second stage units, estimation of population mean and total.Double sampling in ratio and regression methods of estimation. Concept of Interpenetrating sub-sampling.

(ii) Econometrics: Nature of econometrics, the general linear model (GLM) and its extensions, ordinary least squares (OLS) estimation and prediction, generalized least squares (GLS) estimation and prediction, heteroscedastic disturbances, pure and mixed estimation. Auto correlation, its consequences and tests. Theil BLUS procedure, estimation and prediction, multi-collinearity problem, its implications and tools for handling the problem, ridge regression. Linear regression and stochastic regression, instrumental variable estimation, errors in variables, autoregressive linear regression, lagged variables, distributed lag models, estimation of lags by OLS method, Koyck’s geometric lag model. Simultaneous linear equations model and its generalization, identification problem, restrictions on structural parameters, rank and order conditions. Estimation in simultaneous equations model, recursive systems, 2 SLS estimators, limited information estimators, k-class estimators, 3 SLS estimator, full information maximum likelihood method, prediction and simultaneous confidence intervals.

(iii) Applied Statistics: Index Numbers: Price relatives and quantity or volume relatives, Link and chain relatives composition of index numbers; Laspeyre's, Paasches’, Marshal Edgeworth and Fisher index numbers; chain base index number, tests for index number, Construction of index numbers of wholesale and consumer prices, Income distribution-Pareto and Engel curves, Concentration curve, Methods of estimating national income, Inter-sectoral flows, Inter- industry table, Role of CSO. Demand Analysis Time Series Analysis: Economic time series, different components, illustration, additive and multiplicative models, determination of trend, seasonal and cyclical fluctuations. Time-series as discrete parameter stochastic process, auto covariance and autocorrelation functions and their properties. Exploratory time Series analysis, tests for trend and seasonality, exponential and moving average smoothing. Holt and Winters smoothing, forecasting based on smoothing. Detailed study of the stationary processes: (1) moving average (MA), (2) auto regressive (AR), (3) ARMA and (4) AR integrated MA (ARIMA) models. Box-Jenkins models, choice of AR and MA periods. Discussion (without proof) of estimation of mean, auto covariance and autocorrelation functions under large sample theory, estimation of ARIMA model parameters. Spectral analysis of weakly stationary process, periodogram and correlogram analyses, computations based on Fourier transform.

STATISTICS-IV (DESCRIPTIVE TYPE) (For ISS only)

(Equal number of questions i.e. 50% weightage from all the subsections below and candidates have to choose any two subsections and answer)

(i) Operations Research and Reliability: Definition and Scope of Operations Research: phases in Operation Research, models and their solutions, decision-making under uncertainty and risk, use of different criteria, sensitivity analysis. Transportation and assignment problems. Bellman’s principle of optimality, general formulation, computational methods and application of dynamic programming to LPP. Decision-making in the face of competition, two-person games, pure and mixed strategies, existence of solution and uniqueness of value in zero-sum games, finding solutions in 2x2, 2xm and mxn games. Analytical structure of inventory problems, EOQ formula of Harris, its sensitivity analysis and extensions allowing quantity discounts and shortages. Multi-item inventory subject to constraints. Models with random demand, the static risk model. P and Q- systems with constant and random lead times. Queuing models — specification and effectiveness measures. Steady-state solutions of M/M/1 and M/M/c models with associated distributions of queue-length and waiting time. M/G/ 1 queue and Pollazcek-Khinchine result. Sequencing and scheduling problems. 2-machine n-job and 3-machine n-job problems with identical machine sequence for all jobs Branch and Bound method for solving travelling salesman problem. Replacement problems — Block and age replacement policies. PERT and CPM - basic concepts. Probability of project completion. Reliability concepts and measures, components and systems, coherent systems, reliability of coherent systems. Life-distributions, reliability function, hazard rate, common univariate life distributions — exponential, weibull, gamma, etc. Bivariate exponential distributions. Estimation of parameters and tests in these models. Notions of aging — IFR, IFRA, NBU, DMRL and NBUE classes and their duals. Loss of memory property of the exponential distribution. Reliability estimation based on failure times in variously censored life-tests and in tests with replacement of failed items. Stress-strength reliability and its estimation.

(ii) Demography and Vital Statistics: Sources of demographic data, census, registration, ad-hoc surveys, Hospital records, Demographic profiles of the Indian Census. Complete life table and its main features, Uses of life table. Makehams and Gompertz curves. National life tables. UN model life tables. Abridged life tables. Stable and stationary populations. Measurement of Fertility: Crude birth rate, General fertility rate, Age specific birth rate, Total fertility rate, Gross reproduction rate, Net reproduction rate. Measurement of Mortality: Crude death rate, Standardized death rates, Age-specific death rates, Infant Mortality rate, Death rate by cause. Internal migration and its measurement, migration models, concept of international migration. Net migration. International and postcensal estimates. Projection method including logistic curve fitting. Decennial population census in India.

(iii) Survival Analysis and Clinical Trial: Concept of time, order and random censoring, likelihood in the distributions — exponential, gamma, Weibull, lognormal, Pareto, Linear failure rate, inference for these distribution. Life tables, failure rate, mean residual life and their elementary classes and their properties. Estimation of survival function — actuarial estimator, Kaplan — Meier estimator, estimation under the assumption of IFR/DFR, tests of exponentiality against non-parametric classes, total time on test. Two sample problem — Gehan test, log rank test. Semi-parametric regression for failure rate — Cox’s proportional hazards model with one and several covariates, rank test for the regression coefficient. Competing risk model, parametric and non-parametric inference for this model. Introduction to clinical trials: the need and ethics of clinical trials, bias and random error in clinical studies, conduct of clinical trials, overview of Phase I — IV trials, multicenter trials. Data management: data definitions, case report forms, database design, data collection systems for good clinical practice. Design of clinical trials: parallel vs. cross-over designs, cross-sectional vs. longitudinal designs, review of factorial designs, objectives and endpoints of clinical trials, design of Phase I trials, design of single-stage and multi-stage Phase II trials, design and monitoring of phase III trials with sequential stopping, Reporting and analysis: analysis of categorical outcomes from Phase I — III trials, analysis of survival data from clinical trials.

(iv) Quality Control: Statistical process and product control: Quality of a product, need for quality control, basic concept of process control, process capability and product control, general theory of control charts, causes of variation in quality, control limits, sub grouping summary of out of control criteria, charts for attributes p chart, np chart, c-chart, V chart, charts for variables: R, (X ,R), (X ,0) charts. Basic concepts of process monitoring and control; process capability and process optimization. General theory and review of control charts for attribute and variable data; 0.C. and A.R.L. of control charts; control by gauging; moving average and exponentially weighted moving average charts; Cu-Sum charts using V-masks and decision intervals; Economic design of X-bar chart. Acceptance sampling plans for attributes inspection; single and double sampling plans and their properties; plans for inspection by variables for one-sided and two sided specification.

(v) Multivariate Analysis: Multivariate normal distribution and its properties. Random sampling from multivariate normal distribution. Maximum likelihood estimators of parameters, distribution of sample mean vector. Wishart matrix — its distribution and properties, distribution of sample generalized variance, null and non-null distribution of multiple correlation coefficients. Hotelling’s T? and its sampling distribution, application in test on mean vector for one and more multivariate normal population and also on equality of components of a mean vector in multivariate normal population. Classification problem: Standards of good classification, procedure of classification based on multivariate normal distributions. Principal components, dimension reduction, canonical variates and canonical correlation — definition, use, estimation and computation.

(vi) Design and Analysis of Experiments: Analysis of variance for one way and two way classifications, Need for design of experiments, basic principle of experimental design (randomization, replication and local control), complete analysis and layout of completely randomized design, randomized block design and Latin square design, Missing plot technique. Split Plot Design and Strip Plot Design. Factorial experiments and confounding in 2» and 3» experiments. Analysis of covariance. Analysis of non-orthogonal data. Analysis of missing data.

(vii) Computing with C and R : Basics of C: Components of C language, structure of a C program, Data type, basic data types, Enumerated data types, Derived data types, variable declaration, Local, Global, Parametric variables, Assignment of Variables, Numeric, Character, Real and String constants, Arithmetic, Relation and Logical operators, Assignment operators, Increment and decrement operators, conditional operators, Bitwise operators, Type modifiers and expressions, writing and interpreting expressions, using expressions in statements. Basic input/output. Control statements: conditional statements, if - else, nesting of if - else, else if ladder, switch statements, loops in c, for, while, do - while loops, break, continue, exit ( ), goto and label declarations, One dimensional two dimensional and multidimensional arrays. Storage classes: Automatic variables, External variables, Static variables, Scope and lifetime of declarations. Functions: classification of functions, functions definition and declaration, assessing a function, return statement, parameter passing in functions. Pointers (concept only). Structure: Definition and declaration; structure (initialization) comparison of structure variable; Array of structures : array within structures, structures within structures, passing structures to functions; Unions accessing a union member, union of structure, initialization of a union variable, uses of union. Introduction to linked list, linear linked list, insertion of a node in list, removal of a node from list. Files in C: Defining and opening a file, input — output operation on a file, creating a file, reading a file. Statistics Methods and techniques in R.